The d-control Edge electronic dog collars communicate with each other across a range. This range has been developed for both single dog owners and multi-dog packs, with the diversity of sizes, breeds and temperaments of each dog. Each collar can be set up individually for each dog's needs. Choose the collar for your dog from two sizes and according to the desired functions - sound and stimulation impulse / sound, stimulation impulse, vibration.
Training collar for one dog with simple operation
If you have one dog at home and prefer easy control, then the d-control Edge 200 electronic dog training collar is the ideal choice for you, offering sound and stimulation impulse functions with 6 fixed levels.
Collar for another dog d-control Edge and pairing with the transmitter
Have you purchased a collar for your next dog? Let's walk through how to go about pairing together.
The first pairing with the transmitter is always done with the collar in off regime. On the transmitter, we choose the position where the collar for the next dog will be stored. We then place the receiver (collar) on the transmitter for 5 seconds at the points where the red targets are marked.
Wait for the LEDs to alternately flash red and green, release the remote and send the sound command. The collar will beep after pairing. At this point, the collar is paired with the transmitter.
Now we set the necessary functions and the intensity of the stimulation impulse on the transmitter with the choice of a nick or continuous impulse and the setting of the optional booster / vibration button for emergency situations. In this way you can set up to 6 dogs with the d-control Edge series.
Pairing the receiver to a second d-control Edge transmitter
Are you dealing with a situation at home where you change your controller and don't want to keep resetting it over and over again? Easy solution. You can pair up to two transmitters to one receiver (collar). You can have one for regular walks and another one for basic obedience training.
Pairing the collar to the second transmitter is done with the receiver (collar) in "on" regime. Put the transmitter to the receiver and wait for the green and red LEDs to flash alternately. Then press the sound button on the remote control. And we're paired.
Setting up the transmitter to communicate with up to 6 dogs
From the factory, the transmitter for the training collar is preset to pair with 2 dogs.
Other positions can be set very easily by holding the arrow buttons simultaneously. The current number of positions (receivers) will start flashing - i.e. 2. Use the + and - buttons to set the desired number of positions for pairing the collars you want to use on the transmitter - 1 to 6. Confirm the selection by briefly pressing the ON/OFF button.
"Thanks to the d-control Edge electronic collar I can give all my dogs freedom even in the woods"
See how the training collars are used by our customer Aneta Konvalinová and Europeans CZ.
Mass call button
A new feature that has been added to the d-control Edge series compared to other d-control series is the ability to call all the collars (receivers) in bulk. This function is set with the receiver (collar) switched on.
We select a position where no receiver (collar) is stored. So you could store all the collars you want to call at once in this position.
We will attach the collar to the transmitter for 5 seconds and wait for the red and green lights to alternate. Confirm by pressing the sound button. In this way, connect all the collars you wish to have on the mass call in turn.
You can call the dogs using the sound, vibration or stimulation impulse (the setting of the optional button is explained in detail in chapter 9.3 of the manual).
Before you put the collars on the dogs' necks, please check that everything is set up and is working as it should.
Compatible with the d-control professional series
If you already have a d-control professional series training collar at home and are thinking of buying a new collar for your next dog, you can reach for the d-control Edge collar. These two series of training collars communicate with each other.
It can also be reversed. You can pair dog collars from the d-control professional series to the d-control Edge transmitter. The functions and range will be limited and determined by the transmitter.
All pairing steps are detailed in the instruction manual for each product. If you have any further questions that we have not answered, please do not hesitate to contact our sales representatives team, who will be happy to help you with anything.
Comments
Add comment